Linear Lighting. Reinvented.

Footnotes

Visionary Technologies reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Visionary to provide notification of such change. All functionality, features, specifications and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice or obligation.The brands mentioned on this website are the property of their respective owners and are used for informational purposes only. These brands are not affiliated with Visionary Technologies Ltd, and their mention does not imply any partnership or endorsement by them.

1. The light output statistic provided represents the best possible performance measured, subject to a ±7% tolerance. This figure is intended for guidance only and may vary due to factors such as optical, power, and electromechanical variances. For more detailed and specific information, refer to the product datasheet.
2. Product warranty disclosure statements and full details can be found by viewing our Warranty Documentation, Guardian Service Agreements for commercial and residential products and by viewing our terms of service. All documentation can be found on the Visionary Technologies website under the support menu.
3. All CRI values are measured at Tj = Tc = 25°C.CRI values are typical. Visionary maintains a ± 3 tolerance on CRI values.
4. Visionary IP40 Products: These products are rated IP40 under IEC standard 60529, signifying protection against solid objects over 1mm (such as wires or small tools) but offering no protection against water ingress. It's crucial to understand that IP40 indicates a level of dust resistance but not waterproofing. This rating was achieved under controlled laboratory conditions and, like all IP ratings, is not a permanent condition. The effectiveness of the IP40 protection may decrease as a result of normal wear, and it's important for users to recognize that damage due to dust penetration is not covered under warranty. This specification is pertinent to ensuring proper use and installation in accordance with product safety standards, especially in New Zealand's regulatory environment.
5. 304 stainless steel, used in our products, offers enhanced corrosion resistance but is not impervious to all corrosion types. Visionary Technologies Ltd is not liable for corrosion damage due to environmental factors, improper maintenance, or use. Please consult our guidelines for optimal product care.
6. Surge capability, particularly in the context of lighting products and accessories, relates to the ability of electrical devices to withstand sudden increases in voltage or current without damage. The terms "L-N" and "L-FG/N-FG" refer to different types of surge events. "L-N" (Line to Neutral) signifies a surge between the active(line) and neutral conductors, a common scenario in AC power systems. Conversely, ",L-FG/N-FG" (Line to Frame Ground/Neutral to Frame Ground)describes surges that occur between the line or neutral and the frame ground(protective earth), representing different pathways through which electrical disturbances can affect equipment. Meeting the Performance Criterion B indicates that the device can sustain a specific level of surge without functional degradation or loss of structural integrity, ensuring reliability and safety in varying electrical environments, especially pertinent in regions like New Zealand with its specific electrical standards and requirements.
7. Flicker Index (IEEE 1789): As defined under IEEE Standard 1789, this index measures the fluctuation in brightness of light sources, crucial for compliance with various health and safety regulations. Under IEEE Standard 1789 for LED lighting, a flicker index of less than 0.1 is generally considered "flicker-free." This standard indicates that lighting with such a low flicker index is unlikely to be perceptible or cause health issues related to flicker, such as eye strain or headaches.
8. LED Driver Lifespan (in Hours): The estimated lifespan of LED drivers, commonly ranging from 50,000 to 100,000 hours, is based on ideal usage conditions. This estimation is subject to variations due to real-world factors, notably thermal conditions and ambient temperature, along with voltage fluctuations and usage patterns. Excessive heat can significantly reduce the lifespan of LED drivers. As per New Zealand law, manufacturers, including Visionary Technologies Ltd, must convey that these hour-based lifespan figures are approximations and not absolute guarantees, reflecting typical performance under optimal conditions.
9. This product has achieved an IK09 rating, indicating a high level of protection against mechanical impacts as per the EN 62262 standard. While IK09 denotes resistance to impacts of up to 10 joules, it does not imply immunity to all physical damage. This rating specifically addresses impact resistance and does not cover other types of mechanical stress or environmental conditions. Users and installers should note these limitations in accordance with New Zealand's product safety and consumer information regulations, understanding that the IK09 rating does not encompass all possible damage scenarios.
10. Visionary Technologies Ltd defines 'Low Glare' in accordance with a Unified Glare Rating (UGR) of 19 or below. This rating is calculated based on specific parameters: a ceiling/cavity reflectance of0.7,wall reflectance of 0.5, and a working plane reflectance of 0.2, within a room context defined by dimensions X = 4H and Y = 12H.
11. L70 TM-21 Lifespan Calculations and Limitations:L70 TM-21 refers to a specific methodology for predicting the lifespan of LED lighting, where L70 indicates the point at which light output drops to 70% of its original brightness. TM-21 calculations, endorsed by the Illuminating Engineering Society (IES), extrapolate long-term performance from shorter-term tested data. However, these calculations come with limitations; they are estimates and may not account for all real-world variables such as temperature fluctuations, usage patterns, and power quality.
12. Visionary Technologies offers mounting options suitable for various common applications. However, compatibility with all third-party products cannot be unequivocally guaranteed. Customers should verify compatibility with non-Visionary products independently.