Specifications
Downloads:
Product Bundle
Trim & Materials
White
Black
Material Composition
Die-cast Aluminium Heatsink & Trim
ASB Plastic Connectors & Ball Cover
UV-Resistant Optical Polycarbonate Lens
Power
Typical Figures
X-Drive™ Pro 2 Model
33.5 Watts  - Lighting Engine
37 Watts - Lamp + Driver  (X-Drive™ Pro 2)
Sleep™ and Studio™ Models
35.5 Watts  - Lighting Engine
39 Watts - Lamp + Driver  (Sleep™ and Studio™)
Dimensions & Cutout
Trim Diameter: 235mm
Product Depth: 133mm
Minimum Cutout: 205mm
Cutout Range: 205-225mm
Recommended Cutout: 216mm
Optics & Glare1
200
Focal
400
Focal
600
Focal
800
Diffused
Unified Glare Rating
12.9 UGR - 200
14.6 UGR - 400
16.6 UGR - 600
25.1 UGR - 800 Diffused
(Test Condition: X=4H , Y=12H)
Light Output2
Delivered Lumens
Up to 3060 Lumens (Sleep™ and Studio™)
Up to 4615 Lumens (X-Drive™ Pro 2)
Drivers & Control3,4,5,9
230V AC Mains Input
Triac (Phase Dimmable)
1050mA Constant Current
Trailing Edge Dimmers
5-100% Dimming Range (System Capability)
Amplitude Modulation
50,000 Hour Design life (Tc 700)
DALI 2
1050mA Constant Current
Certified DALI 2 Product
1-100% Dimming Range (Via Amplitude)
Corridor Function
100,000 Hour Design life (Tc 65c)
Lighting Engine6
Constant Current
X-Drive Pro® 2 Model
2700K, 3000K, 4000K CCT Options
90+CRI (R9 min 50)
L90 > 36,000 Hours (TM21-10K)
L70 > 60,000 Hours (TM21-10K)
DLC Premium Certified Diode Technology
3-SDCM (3-Step McAdam Ellipse)
Studio® & Sleep® Models
2700K, 3000K, 4000K (Studio Only) CCT Options
98CRI (R1-R15 >95)
L90 > 32,000 hours (TM21-10K)
L70 > 60,000 hours (TM21-10K)
Rg 100-104 (TM-30)
3-SDCM (3-Step McAdam Ellipse)
IP , IK & Temperature Ratings7
IP Rating
IP65 Front, IP40 Rear
Suitable for Bathrooms, Soffits & Similar Wet Areas
IK Rating
Not Applicable
Operating  Ambient Temperature
-200C to +400C
0-80% Humidity Non-Condensing
Regulatory & Compliance
Thermal Compliance
IC-F & IC-4 Insulation Coverable Rating (Lamp Only)
Luminaire Compliance
IEC 60598-2-2 Ed 2.1 as modified by AS/NZS 60598.2.2:2001, including Amendment A, in conjunction with IEC 60598-1 Ed 7.0 as modified by Annex ZZ of AS/NZS 60598.1:2003. Only the New Zealand part of Appendix ZA and clause 2.13.104 of AS/NZS 60598.2.2:2016 Luminaires Part 2.2: Particular requirements – Recessed luminaires
RCM & EMI
EN 55015 (Electrical lighting and Similar Equipment)
EN55015:2013+A1:2015 I EN61547:2009 (IEC 61547:2009) inseparable from EN61000-3-2:2014 & EN61000-3-3:2013
AS/NZS 4268:2017, Radio equipment and systems – Short range devices (Vitalis® Only)
Control Gear Compliance (Phoenix® 3 & Vitalis®)
AS 61347-2-13 2018; in conjunction with AS/NZS 61347.1-2016+A1.
Control Gear Compliance (DALI 2)
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J)
Surge immunity
EN 61000-4-5/IEC61000-4-5 (AS/NZS 61000-4-5-2006).
Building Element Clearances
HCB Clearance = 0 , SCB Clearance = 0
Warranty & Service8
Residential Usage
10 Year Product Warranty
5 Year Guardian Service, Parts & Labour
Commercial Usage
7 Year Product Warranty
5 Year Guardian Service, Parts & Labour
SKU Breakdown
Example SKU: D235-DW3KF6C
D235
Model SKU
-
X
Driver
X
Trim
XX
CCT
XX
Optic
X
Tech
Driver
(D) - Phase Dimmable | Phoenix 3
(A) - DALI 2 Driver
Optic
(NA) - 800 Diffused Lens
(F2) - 200 Focal Lens
(F4) - 400 Focal Lens
(F6) - 600 Focal Lens
Technology
(NA) - X-Drive ProTM 2
(S) - Sleep TechnologyTM
(C) - Studio TechnologyTM
CCT
(27K) - 2700K Very Warm White
(3K) - 3000K Warm White
(4K) - 4000K Pure White
Trim
(W) - Visionary Matte White
(B) - Matte Black

Footnotes

Visionary Technologies reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Visionary to provide notification of such change. All functionality, features, specifications and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice or obligation. The brands mentioned on this website are the property of their respective owners and are used for informational purposes only. These brands are not affiliated with Visionary Technologies Ltd, and their mention does not imply any partnership or endorsement by them.

  1. Low Glare Definition - Visionary Technologies Ltd: 'Low Glare' is defined in accordance with a Unified Glare Rating (UGR) of 19 or below. This rating, calculated for one of the product variants, involves specific parameters: ceiling/cavity reflectance of 0.7, wall reflectance of 0.5, and working plane reflectance of 0.2, within a room of dimensions X = 4H and Y = 12H. It's important to note that glare levels may vary between product variants due to factors such as design differences and installation environments. Therefore, the UGR for other variants might differ, and users should consult specific product data for accurate glare information.
  2. The light output statistic provided represents the best possible performance measured, subject to a ±7% tolerance. This figure is intended for guidance only and may vary due to factors such as optical, power, and electro mechanical variances. For more detailed and specific information, refer to the product datasheet.
  3. Surge capability, particularly in the context of lighting products and accessories, relates to the ability of electrical devices to withstand sudden increases in voltage or current without damage. The terms "L-N" and "L-FG/N-FG" refer to different types of surge events. "L-N" (Line to Neutral) signifies a surge between the active(line) and neutral conductors, a common scenario in AC power systems. Conversely, ",L-FG/N-FG" (Line to Frame Ground/Neutral to Frame Ground)describes surges that occur between the line or neutral and the frame ground(protective earth), representing different pathways through which electrical disturbances can affect equipment. Meeting the Performance Criterion B indicates that the device can sustain a specific level of surge without functional degradation or loss of structural integrity, ensuring reliability and safety in varying electrical environments, especially pertinent in regions like New Zealand with its specific electrical standards and requirements.
  4. Flicker Index (IEEE 1789): As defined under IEEE Standard 1789, this index measures the fluctuation in brightness of light sources, crucial for compliance with various health and safety regulations. Under IEEE Standard 1789 for LED lighting, a flicker index of less than 0.1 is generally considered "flicker-free." This standard indicates that lighting with such a low flicker index is unlikely to be perceptible or cause health issues related to flicker, such as eye strain or headaches.
  5. LED Driver Lifespan (in Hours): The estimated lifespan of LED drivers, commonly ranging from 50,000 to 100,000 hours, is based on ideal usage conditions. This estimation is subject to variations due to real-world factors, notably thermal conditions and ambient temperature, along with voltage fluctuations and usage patterns. Excessive heat can significantly reduce the lifespan of LED drivers. As per New Zealand law, manufacturers, including Visionary Technologies Ltd, must convey that these hour-based lifespan figures are approximations and not absolute guarantees, reflecting typical performance under optimal conditions.
  6. L70, L85, L90 TM-21 Lifespan Calculations and Limitations: L70, L85, and L90 TM-21 refer to methodologies for predicting the lifespan of LED lighting, where L70, L85, and L90 indicate the points at which light output drops to 70%, 85%, and 90% of its original brightness, respectively. These TM-21 calculations, endorsed by the Illuminating Engineering Society (IES), extrapolate long-term performance from shorter-term tested data. However, it's important to note that these are estimations with inherent limitations; they might not fully account for all real-world variables such as temperature fluctuations, usage patterns, and power quality. These lifespan predictions serve as guidelines rather than exact forecasts, and actual performance can vary based on operating conditions.
  7. Visionary IP65 Products are splash, water, and dust resistant and were tested under controlled laboratory conditions with a rating of IP65 under IEC standard 60529. Splash, water, and dust resistance are not permanent conditions. Resistance might decrease as a result of normal wear. Liquid damage not covered under warranty. IP Rating refers to the front of the lamp. The Rear of the Lamp is IP40.
  8. Product warranty disclosure statements and full details can be found by viewing our Warranty Documentation, Guardian Service Agreements for commercial and residential products and by viewing our terms of service. All documentation can be found on the Visionary Technologies website under the support menu.
  9. This product is optimized for use with trailing edge dimming technology, providing enhanced performance and compatibility in such setups. While it also functions with leading edge dimmers, Visionary Technologies Ltd cannot guarantee optimal performance or full compatibility with all leading edge dimming products, especially those from third-party manufacturers. Users should be aware of potential variations in dimming performance and are advised to verify compatibility with their specific dimming systems. As always, product performance can vary and is subject to the unique characteristics of individual installations.

Register

Request a Membership