Specifications
Downloads:
Product Bundle
Trim & Materials
White
Material Composition
3MTM 300LSE Double-Sided Acrylic Foam Tapes
3oZ Copper PCB Substrate
PCB Epoxy Conformal Coating
Power
Typical Figures
Model Variants
10 Watts Per Meter
Input Power
Input Power: 24V DC
Circuit Topology: Constant Voltage
Dimensions & Cut Lengths9
PCB Diameter: 10mm
Product Length: 5m (Reel Form)
PCB Height: 2.25mm
Minimum Length: 50mm
Cut Spacing: 50mm
Max Bend Radius: 20mm
LED Spacing
12 Watts Per Meter Model: 8.33mm
Backing Adhesive
3MTM 300LSE
Adhesion 90N/100mm
Operating Max Temp: 93C
Solvent Resistance: Very Good
Water Resistance: Very Good
Light Output2
Delivered Lumens
LED Spacing
1,030 Lumens Per Meter
Lighting Engine6
Constant Current
Flex 10 Lighting Engine V1
3000K, 4000K LED Diodes
L70 > 50,000 Hours (TM21-10K)
Dimmable Compatible Lighting Engine
3oZ Copper PCB Substrate
Dimmable Compatible Lighting Engine
IP , IK & Temperature Ratings7
Standard Model IP Rating
IP65 Hermetically Sealed PCB
Suitable for Bathrooms, Soffits & Similar Wet Areas
Waterproof Model IP Rating
IP68 Hermetically Sealed PCB
Suitable for Non-Salt Wet Applications
Operating  Ambient Temperature
-200C to +400C
0-100% Humidity Condensing
Warranty & Service8
Residential Usage
3 Year Product Warranty
Commercial Usage
3 Year Product Warranty
Drivers & Accessories
Constant Current
24V Interior IP20 Non-Dimmable LED Drivers
6W Rated Power (D6W-CV-IP20)
12W Rated Power (D12W-CV-IP20)
20W Rated Power (D20W-CV-IP20)
30W Rated Power (D30W-CV-IP20)
60W Rated Power (D60W-CV-IP20)
100W Rated Power (D100W-CV-IP20)
160W Rated Power (D160W-CV-IP20)
250W Rated Power (D250W-CV-IP20)
24V Exterior  IP67 Non-Dimmable LED Drivers
36W Rated Power (D36W-CV-IP67)
48W Rated Power (D48W-CV-IP67)
60W Rated Power (D60W-CV-IP67-V2)
100W Rated Power (D100W-CV-IP67-V2)
150W Rated Power (D150W-CV-IP67-V2)
250W Rated Power (D250W-CV-IP67-V2)
24V Interior IP20 DALI 2 Drivers
50W Rated Power (D50W-CV-IP20-DA)
800W Rated Power (D80W-CV-IP20-DA)
160W Rated Power (D160W-CV-IP20-DA)
LED Controllers
5 Channel LED Controller - Enables Dimming on Non-Dimmable LED Drivers & CCT Changing If applicable (VISSF3-CONT-5P)
LED Controller Remotes
5 Channel LED Controller Remote - Channel Dimming, Tuning & RGB Changing Options (VISSF3-REM-5P)
Connectors (4-Pole) IP20
Strip to Strip Connector: (VISSF-CONN-10MM-SS-4P)
Wire to Strip Connector: (VISSF-CONN-10MM-WS-4P)
Strip to Strip Connector ‘L’ Join: (VISSF-JOIN-10MM-WS-4P)
SKU Breakdown
Example SKU: VISF2-10W-IP65-3K-5M
VISF2
Model SKU
-
XX
Power
-
IPXX
IP Rating
-
XXX
CCT
-
XX
Length
Power
(10W) - 10 Watts Per Meter
IP Rating
(IP65) - IP65 Rated Environment
(IP68) - IP68 Rated Environment
CCT
(3K) - 3000K Warm White
(4K) - 4000K Pure White
Length
(1M) - 1 Meter Cut Length
(5M) - Full Reel

Footnotes

Visionary Technologies reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Visionary to provide notification of such change. All functionality, features, specifications and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice or obligation. The brands mentioned on this website are the property of their respective owners and are used for informational purposes only. These brands are not affiliated with Visionary Technologies Ltd, and their mention does not imply any partnership or endorsement by them.

  1. Low Glare Definition - Visionary Technologies Ltd: 'Low Glare' is defined in accordance with a Unified Glare Rating (UGR) of 19 or below. This rating, calculated for one of the product variants, involves specific parameters: ceiling/cavity reflectance of 0.7, wall reflectance of 0.5, and working plane reflectance of 0.2, within a room of dimensions X = 4H and Y = 12H. It's important to note that glare levels may vary between product variants due to factors such as design differences and installation environments. Therefore, the UGR for other variants might differ, and users should consult specific product data for accurate glare information.
  2. The light output statistic provided represents the best possible performance measured, subject to a ±7% tolerance. This figure is intended for guidance only and may vary due to factors such as optical, power, and electro mechanical variances. For more detailed and specific information, refer to the product datasheet.
  3. Surge capability, particularly in the context of lighting products and accessories, relates to the ability of electrical devices to withstand sudden increases in voltage or current without damage. The terms "L-N" and "L-FG/N-FG" refer to different types of surge events. "L-N" (Line to Neutral) signifies a surge between the active(line) and neutral conductors, a common scenario in AC power systems. Conversely, ",L-FG/N-FG" (Line to Frame Ground/Neutral to Frame Ground)describes surges that occur between the line or neutral and the frame ground(protective earth), representing different pathways through which electrical disturbances can affect equipment. Meeting the Performance Criterion B indicates that the device can sustain a specific level of surge without functional degradation or loss of structural integrity, ensuring reliability and safety in varying electrical environments, especially pertinent in regions like New Zealand with its specific electrical standards and requirements.
  4. Flicker Index (IEEE 1789): As defined under IEEE Standard 1789, this index measures the fluctuation in brightness of light sources, crucial for compliance with various health and safety regulations. Under IEEE Standard 1789 for LED lighting, a flicker index of less than 0.1 is generally considered "flicker-free." This standard indicates that lighting with such a low flicker index is unlikely to be perceptible or cause health issues related to flicker, such as eye strain or headaches.
  5. LED Driver Lifespan (in Hours): The estimated lifespan of LED drivers, commonly ranging from 50,000 to 100,000 hours, is based on ideal usage conditions. This estimation is subject to variations due to real-world factors, notably thermal conditions and ambient temperature, along with voltage fluctuations and usage patterns. Excessive heat can significantly reduce the lifespan of LED drivers. As per New Zealand law, manufacturers, including Visionary Technologies Ltd, must convey that these hour-based lifespan figures are approximations and not absolute guarantees, reflecting typical performance under optimal conditions.
  6. L70, L85, L90 TM-21 Lifespan Calculations and Limitations: L70, L85, and L90 TM-21 refer to methodologies for predicting the lifespan of LED lighting, where L70, L85, and L90 indicate the points at which light output drops to 70%, 85%, and 90% of its original brightness, respectively. These TM-21 calculations, endorsed by the Illuminating Engineering Society (IES), extrapolate long-term performance from shorter-term tested data. However, it's important to note that these are estimations with inherent limitations; they might not fully account for all real-world variables such as temperature fluctuations, usage patterns, and power quality. These lifespan predictions serve as guidelines rather than exact forecasts, and actual performance can vary based on operating conditions.
  7. Visionary IP65 LED Strip Lighting: Our IP65-rated products are resistant to splashes, water, and dust, tested under controlled conditions per IEC standard 60529. It's crucial to note that this rating does not apply to areas where the strip has been cut and not resealed properly. IP65 resistance is not a permanent condition and may degrade with normal wear; liquid damage is not covered under warranty. Additionally, we offer an IP68 option, which provides complete protection against dust and continuous immersion in water. However, the IP68 rating assumes proper installation and sealing, especially at cut or joint points. The efficacy of IP68 in preventing water and dust ingress is contingent on maintaining the integrity of the seal in real-world applications.
  8. Product warranty disclosure statements and full details can be found by viewing our Warranty Documentation, Guardian Service Agreements for commercial and residential products and by viewing our terms of service. All documentation can be found on the Visionary Technologies website under the support menu.
  9. Visionary Technologies Ltd's LED strip products come with an adhesive backing designed for general use. However, it's important to note that we do not guarantee the adhesive's performance on all surface types. The effectiveness of the adhesive can vary based on the material, texture, and condition of the surface, as well as environmental factors such as temperature and humidity. Users should evaluate the suitability of the adhesive for their specific application and may need to consider additional fixing methods for optimal adherence.

Register

Request a Membership