Specifications
Downloads:
Product Bundle
Trim & Materials
White
Material Composition
Extruded Aluminium Frame, Powder Coated
Pressed Aluminium Back Plate
UV-Resistant Optical Polycarbonate Lens
Power
Typical Figures
295X1195mm & 595X595mm Models
30 Watts - Lamp + Driver
595X1195mm Model
50 Watts - Lamp + Driver
Dimensions & Cutout
Product Model Variants
295X1195mm
595X595mm
595X1195mm
(Width X Length)
All Models
Total Depth: 32mm
Optics & Glare1
1200
Diffused
Unified Glare Rating
<19 UGR - 1200 Micro-Prismatic Model
(Test Condition: X=4H , Y=12H)
Light Output2
Delivered Lumens
295X1195mm & 595X595mm Models
Up to 3550 Lumens
595X1195mm Model
Up to 5850 Lumens
Drivers & Control3,4,5
230V AC Mains Input
Non-Dimmable 295X1195mm & 595X595mm Models
750mA Constant Current
31.5W Max Power Rating
2000V (L-N) Surge Protection
Flicker-Free Topology
100,000 Hour Design life (Tc 700)
DALI 2  295X1195mm & 595X595mm Models
750mA Constant Current
Certified DALI 2 Product
1-100% Dimming Range (Via Amplitude)
Flicker-Free Topology
100,000 Hour Design life (Tc 700)
1-10V  295X1195mm & 595X595mm Models
750mA Constant Current
Certified DALI 2 Product
5-100% Dimming Range (Via Amplitude)
Flicker-Free Topology
100,000 Hour Design life (Tc 700)
Non-Dimmable 595X1195mm Model
1300mA Constant Current
50.4W Max Power Rating
2000V (L-N) Surge Protection
Flicker-Free Topology
100,000 Hour Design life (Tc 700)
DALI 2  595X1195mm Model
1300mA Constant Current
Certified DALI 2 Product
1-100% Dimming Range (Via Amplitude)
Flicker-Free Topology
100,000 Hour Design life (Tc 700)
1-10V  595X1195mm Model
1300mA Constant Current
Certified DALI 2 Product
5-100% Dimming Range (Via Amplitude)
Flicker-Free Topology
100,000 Hour Design life (Tc 700)
Lighting Engine6
Constant Current
Avira Lighting Engine V1
4000K  CCT
80+CRI (R9 min 0)
L70 > 60,000 Hours (TM21-10K)
3-SDCM (3-Step McAdam Ellipse)
IP, IK & Temperature Ratings7
IP Rating
IP40 Front, IP40 Rear
IK Rating
Not Applicable
Operating  Ambient Temperature
-200C to +400C
0-80% Humidity Non-Condensing
Regulatory & Compliance
Luminaire Compliance (All Models)
AS/NZS 60598.2.1:1998 Luminaires Part 2.1:Particular requirements – Fixed general purpose luminaires, in conjunction with AS/NZS60598.1:2003 Luminaires Part 1: General requirements and tests.
RCM & EMI (All Models)
EN 55015 (Electrical lighting and Similar Equipment)
EN55015:2013+A1:2015 I EN61547:2009 (IEC 61547:2009) inseparable from EN61000-3-2:2014 & EN61000-3-3:2013
Surge immunity (All Models)
EN 61000-4-5/IEC61000-4-5 (AS/NZS 61000-4-5-2006).
Control Gear Compliance (All Models)
IEC 61347-2-13 2006-05 (Ed. 1.0) Lamp controlgear- Part 2-13 Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules; in conjunction with AS/NZS 61347.1-2002 (IEC 61347-1:2000, MOD).
DALI 2 Specific Compliance
IEC 62386-101(DALI-2), IEC 62386-102(DALI-2), IEC 62386-207(DALI-2)
Warranty & Service8
Residential Usage
5 Year Product Warranty
3 Year Guardian Service, Parts & Labour
Commercial Usage
5 Year Product Warranty
3 Year Guardian Service, Parts & Labour
SKU Breakdown
Example SKU: VISHP2-50W-4K-F12-1195X595-DA
VISHP2
Model SKU
-
XXX
Power
-
XX
CCT
-
XXX
Lens
-
XXXXXXXX
Body
-
XX
Driver
Body
(1195X595) - 1195X595mm Body
(595X595) - 595X595 Body
(1195X295) - 1195X295mm Body
CCT
(4K) - 4000K Pure White
Lens
(F12) - Low Glare 1200 Optic
Power
(30W) - 30W System power
(50W) - 50W System power
Driver
(NA) - Standard Non-Dimmable
(DA) - DALI 2 Driver
(10) - 1-10V Driver

Footnotes

Visionary Technologies reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Visionary to provide notification of such change. All functionality, features, specifications and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice or obligation. The brands mentioned on this website are the property of their respective owners and are used for informational purposes only. These brands are not affiliated with Visionary Technologies Ltd, and their mention does not imply any partnership or endorsement by them.

  1. Low Glare Definition - Visionary Technologies Ltd: 'Low Glare' is defined in accordance with a Unified Glare Rating (UGR) of 19 or below. This rating, calculated for one of the product variants, involves specific parameters: ceiling/cavity reflectance of 0.7, wall reflectance of 0.5, and working plane reflectance of 0.2, within a room of dimensions X = 4H and Y = 12H. It's important to note that glare levels may vary between product variants due to factors such as design differences and installation environments. Therefore, the UGR for other variants might differ, and users should consult specific product data for accurate glare information.
  2. The light output statistic provided represents the best possible performance measured, subject to a ±7% tolerance. This figure is intended for guidance only and may vary due to factors such as optical, power, and electro mechanical variances. For more detailed and specific information, refer to the product datasheet.
  3. Surge capability, particularly in the context of lighting products and accessories, relates to the ability of electrical devices to withstand sudden increases in voltage or current without damage. The terms "L-N" and "L-FG/N-FG" refer to different types of surge events. "L-N" (Line to Neutral) signifies a surge between the active(line) and neutral conductors, a common scenario in AC power systems. Conversely, ",L-FG/N-FG" (Line to Frame Ground/Neutral to Frame Ground)describes surges that occur between the line or neutral and the frame ground(protective earth), representing different pathways through which electrical disturbances can affect equipment. Meeting the Performance Criterion B indicates that the device can sustain a specific level of surge without functional degradation or loss of structural integrity, ensuring reliability and safety in varying electrical environments, especially pertinent in regions like New Zealand with its specific electrical standards and requirements.
  4. Flicker Index (IEEE 1789): As defined under IEEE Standard 1789, this index measures the fluctuation in brightness of light sources, crucial for compliance with various health and safety regulations. Under IEEE Standard 1789 for LED lighting, a flicker index of less than 0.1 is generally considered "flicker-free." This standard indicates that lighting with such a low flicker index is unlikely to be perceptible or cause health issues related to flicker, such as eye strain or headaches.
  5. LED Driver Lifespan (in Hours): The estimated lifespan of LED drivers, commonly ranging from 50,000 to 100,000 hours, is based on ideal usage conditions. This estimation is subject to variations due to real-world factors, notably thermal conditions and ambient temperature, along with voltage fluctuations and usage patterns. Excessive heat can significantly reduce the lifespan of LED drivers. As per New Zealand law, manufacturers, including Visionary Technologies Ltd, must convey that these hour-based lifespan figures are approximations and not absolute guarantees, reflecting typical performance under optimal conditions.
  6. L70, L85, L90 TM-21 Lifespan Calculations and Limitations: L70, L85, and L90 TM-21 refer to methodologies for predicting the lifespan of LED lighting, where L70, L85, and L90 indicate the points at which light output drops to 70%, 85%, and 90% of its original brightness, respectively. These TM-21 calculations, endorsed by the Illuminating Engineering Society (IES), extrapolate long-term performance from shorter-term tested data. However, it's important to note that these are estimations with inherent limitations; they might not fully account for all real-world variables such as temperature fluctuations, usage patterns, and power quality. These lifespan predictions serve as guidelines rather than exact forecasts, and actual performance can vary based on operating conditions.
  7. Visionary IP40 Products: These products are rated IP40 under IEC standard 60529, signifying protection against solid objects over 1mm (such as wires or small tools) but offering no protection against water ingress. It's crucial to understand that IP40 indicates a level of dust resistance but not waterproofing. This rating was achieved under controlled laboratory conditions and, like all IP ratings, is not a permanent condition. The effectiveness of the IP40 protection may decrease as a result of normal wear, and it's important for users to recognize that damage due to dust penetration is not covered under warranty. This specification is pertinent to ensuring proper use and installation in accordance with product safety standards, especially in New Zealand's regulatory environment.
  8. Product warranty disclosure statements and full details can be found by viewing our Warranty Documentation, Guardian Service Agreements for commercial and residential products and by viewing our terms of service. All documentation can be found on the Visionary Technologies website under the support menu.

Register

Request a Membership